The PixLite 16 MkII ECO controller allows you to connect your LED pixels directly. The SPI decoder receives control data via a sACN (E1.31) or Art-Net-over-Ethernet network connection.
With a capacity of 5,440 RGB pixels (4,096 RGBW pixels) and 16 outputs, the PixLite 16 MkII ECO controller is perfect for large pixel projects.In addition to the 16-pixel outputs, the PixLite 16 MkII ECO controller can control four additional DMX512 universes (only via the E1.31 protocol) via four additional outputs. Thus, besides the pixels, e.g. a fog machine or multiple PAR headlights are controlled.
The PixLite 16 MkII ECO controller supports the following protocols:
- sACN (E1.31)
The PixLite 16 MkII ECO controller is multicast and unicast capable.
The total capacity is 32 DMX universes. It can thus be controlled up to 340 RGB pixels or 256 RGBW pixels per output.
The Advatek GUI Utility makes it very easy to configure the controller and update it to new firmware.
The controller is split into two banks (8 outputs per bank), allowing you to operate 12V and 5V pixels directly from the board at the same time.
The pixels can be powered directly from the controller up to 7.5A per output, but it comes standard with 4A mini-blade fuses. You can change the fuses to any value (up to a maximum of 7.5 A, a maximum of 32 A per bank).
|Input:||sACN (E1.31), Art-Net|
|Voltage:||5V -24V DC|
|Working temperature:||-40 bis + 80 °C|
|DMX512 outputs:||4 (only over E1.31)|
|max. Pixel per output:||340 RGB-Pixel (256 RGBW-Pixel)|
|max. Pixel total:||5,440 RGB-Pixel (4,096 RGBW-Pixel)|
|Delivery included:||1 Controller|
Currently the following pixels are supported:
Note: Only one pixel type can be used per controller.
If your desired pixel is not supported, please contact us, we may be able to realize your pixel for you as a special programming (fee-based).